Details, Fiction and Mineral Processing Plant

Are you looking for a easy efficient gold recovery process?

Let me inform you about mineral processing equipment that’s being used successfully all round the world, by large scale mining operations through to artisanal miners.

It is an alternative to using cyanide.


One of the most efficient and simple technologies does NOT require the use of dangerous chemicals.

Sure, using a cyanide solution for gold leaching is prevalent.

BUT, as Wired magazine by the United Kingdom points out…

The waste product from cyanidation is a disgusting and toxic gloop that could seep into rivers or toxin groundwater, killing wildlife and rendering landscape sterile. Huge pits of ore could be exposed to cyanide leaching in colonies, together with the runoff that a significant environmental hazard which demands a significant cost to render secure.

Rather than that, why not utilize gravity?


Gravity separation of fine gold has been the working principle in many low-cost mineral processing plants, all over the world.

That is in both small-scale and large-scale mineral extraction operations.

By way of example, a little gold vibration table employs a low-capacity vibrating table for gold extraction.


Naturally, it’s not only for gold. Mineral extraction using a concentrating table functions for regaining other valuable metals and minerals too, including all heavy minerals, heavy mineral sands, illmenite, rutile, gemstones, platinum, tin, wolfram, tantalite, zircon, topaz and diamonds.

The Wave Table is ideal for cleaning up sluice box concentrates and separating gold from black sands, also. The Wave Table is ideal for cleaning up concentrates from Knelson, Falcon, Knudsen, STLBs as well as other centrifugal concentrators. (For large throughputs and high capacity mining/processing surgeries, especially for gold, we can aid you with the most cost effective Centrifugal Concentrators.)


Larger plantations are utilizing Wave Tables to carry out closing gold clean-ups and also the’finishing’ of gold concentrates. This process removes the need to utilize cyanide or mercury.

Gold tide tables are lots better for your environment, in addition to for workplace safety!


If you wish to effectively recover fine gold out of gold bearing ore, you will need a Centrifugal Concentrator. For instance, a 1-3 TPH unit can handle both alluvial and hard rock material.

In a large mineral processing plant, you may use a Centrifugal Concentrator (known in some countries as an STLB) to perform the primary concentration. That is, to recover all of the gold and heavy minerals from the ore feed.


However, to actually get’clean gold’, you have to then run the cons through another procedure (a secondary concentrator), such as running the cons over a Wave Table. By doing this, an updated percentage is regained that is much smaller in bulk, therefore it’s a lot easier to deal with.

When concentrates are washed upon a Wave Table, you create clean gold prepared to be smelted and become a gold bar available.

This without using cyanide or mercury.

Another cyanide-free option is chemical leaching.

Gold may be extracted from run of mine ore as well as from concentrates using the Chemical Leaching System, and it can be a cost effective non-cyanide gold leaching system which can help you with.

CLS can be used for virtually any metal but is particularly used for the retrieval of silver, gold and platinum group metals.

This unbelievable gold split apparatus comes in 3 models covering all scales of performance. Despite the name, a golden wave table works to extract ANY heavy mineral, where there’s a particular gravity (density) differential between the valuable heavy mineral constituent and its gangue or host substance. Additionally, it cleans gold and grit from the stripped carbon employed in CIP/CIL software.


To quote Ian, a 30-year veteran from the mining and minerals industry,”I have personally had success with the Wave Table recovering very nice heavy minerals like gold, mineral sands, zircon, rutile, illmenite, tantalite, scheelite, stibnite etc.. As it’s so effective at recovering very nice particle sizes, it’s proved excellent as a scavenger on tailings. The Wave Table will readily recover 5 micron gold from tailings. In mineral processing, it is often what you lose to tailings that’s as critical as what you recover. I’ve found that the Wave Table is the ultimate device to check tailings for lost heavy minerals, such as gold. A simple test in your tailings will only take a couple of minutes. You may observe any heavy nutrient dropped in the tailings in a short time span. This type of test will obviate the need for prolonged firing assay turn around times.”

The largest model is that the M10 which does up to 8TPH (tonnes per hour) and the M8 model does up to 1TPH. The smallest model, the M5, is acceptable for small cleanups of 20 kgs per hour and may be used as a laboratory unit.

– Gold wave tables are a lot better for your environment

– Better for workplace security too

– Never use mercury or cyanide again

– efficient and cost-effective.

When you are on the lookout for gold recovery plant available, check out


The Wave Table may be used in the smallest to the biggest gold mine. They may be used for full scale manufacturing purposes, or simply as a clean-up or immersion apparatus from the gold room.

The Wave Table has become increasingly used to recover gold from evaluation samples of a few kgs in size and upwards. This kind of bulk testing is quick and the quantitative results mean that you’re not just relying on flame assays or AAS, particularly in visible free gold deposits, even when gold is ultra fine (5 to 20 microns).

Visit to learn more today.

We can also assist you with a Chemical Leaching System, including supplies and training. Contact us for the “CLS Manual on Non-Cyanide Leaching”.

Also learn more about Gold Shaking Table here.

Leave a Reply

Your email address will not be published. Required fields are marked *

Recent Posts


Consultation Banner

Get Free Estimation

Contact Form